Felt Gift Card Holder Bunting Tutorial
This gift card holder bunting tutorial serves double duty. You can hang it on the tree and it will be adorable and then on Christmas eve fill the rams with gift cards so they kids have lots of surprises to wake up to in the morning. These are easy to sew and you can use your cutting machine to make the process even quicker. Here is a gift card holder bunting tutorial.
Felt Gift Card Holder Bunting Tutorial
Supplies:
Buttons (optional)
Ram Cut File – Get it in this post HERE.
Instructions:
**Note that the gift card will fit up and down in this project. If you want it to go long ways you will need to increase the size of the images.
Cut the files from the blue felt. You can cut them by hand or use your cutting machine. If you are using the Cricut maker and need some tips here is a quick video for setting up the files to create this project.
Once you have cut the files we are ready to attach the backing which will create the pocket for the gift card.
Simply line up the small square-ish piece with the back of the ram and then sew it in place around three edges.
Repeat this step with as many rams as you want on your bunting.
String your rams and buttons onto the twine. Tie a loose knot through the eye hole to keep the ram from slipping. Use as many or as few buttons as you want.
The eye hole is big enough that you can put the Christmas light through if you choose. But of course make sure your lights don’t get hot and that they don’t have any loose or exposed wires because obviously felt on heat would not be a good combination.
Where will you put your gift cards this holiday season? Share with me in the comments below.
Leave a Reply